CAM (Minimum Five Experiments)
1. To prepare part programming for plain turning operation.
2. To prepare part programming for turning operation in absolute mode.
3. To prepare part program in inch mode for plain turning operation.
4. To prepare part program for taper turning operation.
5. To prepare part program for turning operations using turning cycle.
6. To prepare part program for threading operation.
7. To prepare part program for slot milling operation.
8. To prepare part program for gear cutting operation.
9. Toprepare part program for gear cutting using mill cycle.
10. To prepare part program for drilling operation.
11. To prepare part program for multiple drilling operation in Z-axis.
12. To prepare part program for multiple drilling in X-axis.
13. To prepare part program for multiple drilling in X and Z axis using drilling cycle.
Robotics (Minimum Five experiments)
1. To detect the sensor scanning system to overcome limitation of fixed sensors on
various robotic applications, ultrasonic sensor, laser range finders, infrared detectors and
miniature.
2. To find the horizontal and vertical movement up to 180o in either direction.
3. To detect objects with infrared ray detector.
4. To determine object distance (3cm – 300cm).
5. Todetect distance (10cm to 80 cm) with infrared object detector.
6. To determine 5 Axis Robotic Arm movement and its degree of rotation.
7. To lift the object and place 100m away in various directions.
8. To find the gripper movement ( 0 to 50mm).
9. To study various Robotic Arm Configurations.
10. To study Pick and Place Robot