06EEL78 - Power System Simulation Lab Regulation 2006 - 2007 |
1. Power system simulation using MATLAB/ C or C ++ Sie lab /octave
|
1. a) Y Bus formation for p systems with and without mutual coupling, by
singular transformation and inspection method.
b) Determination of bus currents, bus power and line flow for a specified
system voltage (Bus) Profile
|
2. Formation of 2-bus, using 2-bus build Algorithm without mutual.
|
3. ABCD parameters: Formation for symmetric II/I configuration.
Verification of AD-BC=1 Determination of coefficient and regulation.
|
4. Determination of power angle diagrams for salient and non-salient pole
synchronous m/c s, reluctance power, excitation, emf and regulation.
|
5. To determine I) Swing curve II) critical clearing time for a single m/c
for connected to infinity bus through a pair of identical transmission
lines, 3-phase fault on one of the lines for variation of inertia
constant/line parameters /fault location/clearing time/pre-fault electrical
output.
|
6. Formation of Jacobian for a system not exceeding 4 buses *(no PV
buses) in polar coordinates.
|
7. Write a program to perform load using Gaus- Seidel method (only p q
bus).
|
8. To determine fault currents and voltages in a single transmission line
systems with star-delta transformers at a specified location for SLGF,
DLGF.
|
9. Load flow analysis using Gauss Siedel method, NR method, Fast
decoupled flow method for both pq and pv buses.
|
10. Optimal Generator Scheduling for Thermal power plants.
|
Note: 1,2,3,5,7… Simulation Experiments using MATLAB/C or
C++/Sielab/Octave
4,6,9-use
suitable Standard Package.
|